Carboline Company

Carboline Company, with its nuclear approved, commercial grade dedicated fireproofing products, is a world leader in industrial fire protection.

---

CARBOLINE INDUSTRIAL CEMENTITIOUS
Carboline Pyrocrete products offer a level of unparalleled performance in the refinery and petrochemical industries. Pyrocrete 241 and 240 High Yield are recommended for use in nuclear power plants. Pyrocrete 241 has been the industry leader for over 31 years and is the most widely specified fireproofing product in the industry today.

PYROCRETE 241 and PYROCRETE 240 HIGH YIELD
Cementitious inorganic fireproofing formulations, single powder components. Recommended for structural steel, bulkheads, and upgrading the fire resistance of existing concrete. Recommended areas of application are refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.

PYROCRETE 40
A cementitious inorganic polymer fireproofing formulation, a single powder component. Recommended for structural steel, bulkheads, and upgrading the fire resistance of any existing concrete. Recommended areas of application are pharmaceutical facilities, power plants, penthouses, schools and hospitals, abatement spray and air plenums.

CARBOLINE ARCHITECTURAL CEMENTITIOUS • TYPE 5GP
Noncombustible, inorganic fireproofing. Intended for application to interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units.

PYROLITE 15 and PYROLITE 22
Inorganic fireproofing formulations. Designed to fireproof interior structural beams, joists, walls, roofs, decks, girders, columns, electrified floors and pre-cast concrete units.

TYPE 5MD and TYPE 7GP
Medium density, cementitious, noncombustible, inorganic fireproofing. Intended for application to interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units.

TYPE 7GPTM
Specifically formulated for interior high humidity areas. Resistant to damage and moisture and is an excellent choice for use in high traffic areas, mechanical rooms, swimming pool areas, elevator shafts and parking garages.

TYPE 7HD™
High density, cementitious, noncombustible, inorganic fireproofing for application to interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. TYPE 7HD was specifically formulated for interior areas where the potential for high humidity and damage from abuse and severe conditions exists. It is resistant to damage and moisture and is an excellent choice for interior use in high traffic areas, mechanical rooms, swimming pool areas elevator shafts and parking garages.

PYROCRETE 239
A cementitious inorganic fireproofing formulation. Excellent for fireproofing and acoustic combinations. Recommended uses for the fire protection of structural

Isolatek International

Isolatek International offers a wide range of products, and
is recognized worldwide in the construction industry for state-of-the-art passive fireproofing materials.

---

CAFCO BLAZE-SHIELD II
Today’s fast paced construction schedules demand higher in-place physical performance characteristics. BLAZE-SHIELD II is a commercial density (15 pcf/240 kg/m3), compositely reinforced portland cement based SFRM designed to endure construction abuse as well as exposure to extreme weather conditions (UL investigated for exterior use). High recycled content, superior durability, no pre-mixing and reduced labor costs to install make BLAZE-SHIELD II the most cost effective SFRM in the world.

CAFCO BLAZE-SHIELD HP
This medium density cement based product is ideal for indirect weather exposure or limited physical abuse. BLAZE-SHIELD HP is designed for use where abrasion resistance due to maintenance traffic is needed.

CAFCO® FIBER-PATCH
A versatile, hand applied fire resistive material designed for patching damaged CAFCO dry-mix and wet-mix spray-applied fire resistive materials. FIBER-PATCH has excellent bonding characteristics and easily adheres to CAFCO dry-mix and wet-mix spray-applied fire resistive materials (SFRM), galvanized or bare steel surfaces.

CAFCO® 300
A durable, wet mix spray-applied fire resistive material (SFRM) designed to provide fire protection to various floor and roof assemblies, steel beams, columns, and joists in commercial construction projects. CAFCO 300 offers the best fire resistance performance per unit thickness of any spray-applied fire resistive material. This means less material is needed to achieve required fire ratings. CAFCO 300 is also very clean and neat in appearance, with a smooth texture and cost efficient application.

CAFCO® 300 SB
A durable “wet mix” spray-applied fire resistive material (SFRM) specifically designed to provide fire protection in retrofit commercial construction projects.

CAFCO 300 ES and CAFCO QWIK-SET
Typical wet spray (gypsum plaster) SFRMs are mixed with water to form a slurry conveyed through hoses. At end of the day, the material hoses are purged with water to remove any residual plaster so that it doesn’t set up in the hose overnight. This procedure can reduce production time 10 to15 percent per day. The Solution: CAFCO 300 ES (Extended Set). With CAFCO 300 ES, a contractor is able to leave the material in the hoses overnight or even over the week end without the material setting up.

CAFCO QWIK-SET™ is required to properly set the 300 ES and may be used as an option with standard CAFCO 300 to accelerate the set time. This enables subsequent coats to be quickly applied to the required thickness.

CAFCO® 400
Areas where SFRMs are subject to higher levels of abuse or lifetime maintenance traffic are best served by CAFCO 400. This cement based medium density SFRM has the same high fire resistance per unit thickness as CAFCO 300. Easy clean-up, durability and lower thickness requirements for fire ratings make CAFCO 400 the preferred choice for medium density SFRM.

CAFCO® FENDOLITE® M-II and TG
Fendolite® M-II is a single package, factory controlled spray-applied fire resistive material (SFRM) based on vermiculite and Portland cement. It is specifically developed for application to structural steel in exterior environments and interior situations (structural columns, beams, steel vessels and skirts) where higher levels of abrasion resistance and hardness are necessary.

Fendolite TG has been developed for application by trowel in areas where spraying is impractical or not permitted.

Fendolite is lightweight, thus significantly reducing dead load, and is also highly durable and resistant to cracking or spalling under mechanical impact. Fendolite M-II and TG are classified by Underwriters Laboratories for up to 4 hours protection in accordance with the Rapid Rise Fire Test (UL 1709).

CAFCO Pre-Coat
A specially formulated adhesive product for use with CAFCO 300, 300ES and CAFCO 400. Pre-Coat is required prior to the application of the SFRMs on corrugated decking, cellular decking, concrete slabs and trench headers.

CAFCO HEAT-SHIELD ®
A unique blend of inorganic mineral wool aggregate and proprietary binders, Heat-Shield offers a combination of features not found in any other spray-applied thermal/acoustical product. Heat-Shield is ideally suited for light gauge steel panels, concrete slab construction, cold storage facilities, or when an R-20 thermal value is required.